Heatlight Technology HLP 4500  

Homepage

Order a Brochure

Search

Purchasing

Technical Information

Customer Service

o

 

Effective solutions for all you outdoor infrared heating needs

 

Indoor or undercover heating for commercial or domestic use

 

Ideal where low-level, close proximity heating is required

 

Get heat to any area fast with our range of portable heaters

 

Dimmers, timers and PIR's suitable for controlling our heaters

 

Short wave infra red heat for the  Automotive
Industry

 

Please contact us with your requirements

 

View a range of technical Q&A's here

 

 

Feedback : In order to maintain a high level of service to our customers, we feel that your opinions and feedback on our products and this site are crucially important. If you you would like to leave feedback, please contact us here

 

 

 Please select a model from the following tabs > Mobile Paint Dryers Home

 

 HLP4500

    Area coverage 1000mm x 1250mm

   Advantages

 

  • 750mm 1.5kW High output GC Powerslim short wave tubes  fitted to each cassette.

  • Long lamp/emitter life with an average of 6000hours.

  • Typically 4 - 5years continuous professional use

  • 0  - 100% heat instantly through twin 30minute timers on both the Flash and Bake settings.

  • Robust steel constructed stable frame, fitted with rear  wheel locking castors.

  • Maintenance free cassettes with no fan or filter changes.

  • Easy height adjustment by locking gas strut.

  • Individually switched cassettes

  • Horizontal or vertical cassette operation

 

 

 

Description

The 4500 model has three Super long 1.5 Kw GC Powerslim lamps, fitted into three individual cassettes.

This flexible system allows each cassette to be adjusted and locked into position around the contours of the vehicle body, ensuring maximum area coverage.

Height adjustment is made using the high performance locking gas strut, offering a near weightless movement to the cassette support arm.

 

Order Codes

 

HLP4500

 

 

Curing

Average Curing Specification

Filler / Stopper 4 - 6 minutes
Primer 6 - 8minutes
Top coat 10 - 12minutes
 

 

 

 

Specification

 

Area coverage 1000mm x 1250mm

Minimum operating distance - 600mm 
Max vertical curing height 2150mm
Max horizontal curing height 1800mm

 

 

Electrical specification

 

220/240Volt 4.5KW 50Hz single phase 18.75amps
380/415Volt 4.5KW 50Hz 3 phase 6.25amps per phase

 

Pictures

Download the full HLP4500 Information sheet

Phone :   +44 (0)1895 821821
 

Content Copyright of Victory Lighting (UK) Ltd. 2008, All Rights Reserved.

 

Fax : +44 (0)1895 821822

         

HeatLight TechnologyTM is a brand of Victory Lighting (UK) Ltd. This site is optimised for 1024x768 and IE 5.5 or above