|
Description
The
4000 model has
four
Shortwave
1 KW GC lamps, fitted into
four
individual
cassettes.
This
flexible system allows each cassette to be adjusted and locked into position
around the contours of the vehicle body, ensuring maximum area coverage.
Height
adjustment is made using the high performance locking gas strut, offering a near
weightless movement to the cassette support arm.
There are 3 different Control boards
available to suit you individual needs. From a basic complete cycle board with
twin timers and 0 - 100% power control through to fully electronic digital
temperature feed back control board.
|
Control
Boards
Standard Control Board
-
Flash and Bake cycles.
-
0 - 100%
variable heat control on both Flash and Bake
cycles.
-
0
- 30 minute timers on
both
the Flash and Bake settings.
-
Auto turn off at end
of cycle.
Download
HLP4000
Brochure
Specifications
|
Area coverage
800mm x 1300mm
Minimum operating distance
500mm
Max
vertical curing height
2030mm
Max
horizontal curing height
1800mm
Electrical
specification
220
- 240Volt
4KW 50Hz single phase 17amps
Not available as a 380-415v version
Dimensions
|
|
Distance Control Board
All the features of the
Standard Control Board Plus
-
Audible distance sensor allowing quick and
accurate positioning of your unit.
-
Safety feature to turn off the unit
automatically if the system is moved closer
to the vehicle once the heating cycle has
started.
Download
HLP4000DS
Brochure
Curing
|
Average
Curing Times
Filler
/ Stopper
4 - 6minutes
Primer
6 - 8minutes
Base Coat
5 - 8minutes
Top
Coat
8
- 12minutes
Clear Coat
6 - 10minutes
|
|
Optical Temperature
Electronic Control Board
-
Twin 30 minute
electronic programmable timers on both the
Flash and Bake settings.
-
Temperature settable
on both Flash and Bake Cycle.
-
Temperature is
controlled through an optical electronic
digital feedback loop which turns the heat
up and down automatically as required during
the cycle.
-
Digital distance
readout with safety cut out if unit is moved
too close.
-
When operating unit
can display temperature or time remaining on
Flash or Bake cycle.
Download
HLP4000DSTS
Brochure
 |
|
